Sunday, September 07, 2014

Preset Digital BCD Counter

See a Tutor Digital up down BCD counter that will help you take the first step in digital electronics.

Screenshot of widget

Preset Digital BCD Counter

Preset Digital BCD Counter xml use iframe part for your Webpage or Blog.

Counter Lab - The Counter can be tested by clicking the buttons given below, Watch the LEDs and seven segment display. Inc, Dec, and Set buttons are momentary acting and Clk Button is latching type. The Dip Switch in the Left also can be set by clicking on each of them, watch the switch and LEDs after a click.

a. Set the DIP Switch as you like and then Press the Set button. Now you will see the BCD value in the yellow LEDs named 4029 output. The Decimal value will be seen in the seven segment Display. Now try for different dip switch settings and see the BCD LEDs and Decimal output.

b. Now Press The Inc and Dec pushbuttons and See the corresponding green LEDs which indicate the state of the Nand gate 4093 Flip Flop. Set it to Increment up-count or Decrement which is down-count.

c. Now Click the Clk - clock or count button, the switch will latch, press it again to release. If you toggle it once the counter will get a single pulse and it will count it, see the BCD and decimal displays. Now you turn it on and leave it, the counter will keep counting one per second till you turn it off, the clock nand gate is wired to be an oscillator.

Read More

hyperphysics - binary counter and 7 Segment LED Counter